Here in California, a new law went into effect which requires garages to check tire pressure whenever a car comes in for service. I believe in factory recommended tire pressure as a baseline. The standard herein Ca seems to be 35 psi. My 2007 Subaru, my 1997 Benz, as well as my 59 TR3 have all had the 35 pound treatment and they each ride like an oxcart and steer differently at that tire pressure. The Benz ought to be 28 all around, the TR ought to be 22 and the Subaru something else ? but lower. They all are much nicer to drive with FSM correct tire pressure. My 300H picked up 38 psi last week while visiting the garage. The FSM specifies 24 for the 300H. In 1968 when I bought my first set of Michelin X's for the 300H, the Michelin dealer said they would look low at 24 because they were radial, but the only reason to pump them up was if people kept telling me they were low! This morning I noticed American Classic, the mfgr. says to keep them at 35 psi or the whitewalls will crack. Any experience with that? (I don't like 35!) Mike Moore Morgan Hill, Ca ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/