While chasing down vibration in my power steering unit, I ran across what appears to be an issue with the pivot bolt in the mount. Over time, the mount wears a notch into the bolt, offsetting the pump assembly. I was planning a trip down to the local hardware store or fastener specialty shop but then I thought I would ask if there is a source for these before I re-invent the wheel. Thanks in advance Mark Knutsen 300 G Still just plain cold in Iowa ______________________________________________________________________ Disclaimer: **Please Note: Pinnacle Foods Group LLC has changed the domain name for our E-mail addresses. The old format of @pinnaclefoodscorp.com has been changed to @pinnaclefoods.com. The old format will continue to be in service for the next 6 months. After that time any E-mail sent to an @pinnaclefoodscorp.com address will not reach the intended recipient. Please take the time to update your contact information to reflect this change. [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/