When installing the chrome knob on the power seat switch, make sure it is far enough out on the shaft to allow free movement. In my case, there was an indentation on the switch left from the set screw. If you mount the knob so that it bottoms out on the shaft, the switch will only partially activate and have the appearance of being broken. I learned this one the hard way. Mark Knutsen 300 G ______________________________________________________________________ Disclaimer: **Please Note: Pinnacle Foods Group LLC has changed the domain name for our E-mail addresses. The old format of @pinnaclefoodscorp.com has been changed to @pinnaclefoods.com. The old format will continue to be in service for the next 6 months. After that time any E-mail sent to an @pinnaclefoodscorp.com address will not reach the intended recipient. Please take the time to update your contact information to reflect this change. [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/