
Re: [Chrysler300] speed-o-cable problems / 57 C
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] speed-o-cable problems / 57 C
- From: Bill Huff <czbill@xxxxxxxxxx>
- Date: Sun, 13 Jun 2010 17:02:54 -0400
You can buy universal cables that can be fit to
the old housing, at least for testing. I think I
would cobble together another cable and insert it
in the speedo but leave the tranny end
loose. Then I might make sure the cable spins
smoothly by hand, then maybe put a drill motor on
the end and see how the cable acts at various
speeds. To state the obvious, if the cable was
binding in the housing, it wouldn't be breaking
at the top,so the finger points at the
speedometer. Maybe time to pull it and lube it.
Bill Huff
At 6/13/201004:46 PM, Ray Jones wrote:
>
>
>Have you checked the new cables against the
>original one? It may be that, if too short, some
>bending is binding the inner cable. And if too
>long, the routing might have the same effect.
>You need gentle curves and keep te cable well lubed.
>Ray
>
>On Jun 13, 2010, at 3:27 PM, Bill Leahy wrote:
>
>i lied, it broke at the bottom this time.
>
>it worked perfectly / nice and smooth etc
>
>and then ka-bam / no worky
>
>any solutions out there?
>
>remember, it broke twice at the top and once at the bottom.
>
>i bought the two cables from some guy on line / seemed like a nice guy
>and sounded like he knew what he was talking about.
>
>billll
>
>[Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap