Re: [Chrysler300] Fan Shroud

[lettercars@xxxxxxx]

Hi Charlie:
The best measurement I can obtain with the  radiator in the 300H is 13 5/16 
inches between the shroud mounting screws.   Both sides are the same.   
Perhaps a Club member has a radiator out of  the car where they could get a 
more accurate measurement.  The radiator you  have with the brackets should be 
the same, I would think.  Sorry, I don't  have an extra shroud, though.
300ly, Gil
 
 
In a message dated 6/9/2010 1:48:42 P.M. Eastern Daylight Time,  
charlies@xxxxxxxxxxxx writes:

Hi To All,
Thanks to all who responded to my overheating  issue of my 62 Sport. My 
head is now bursting
with cooling info. My plan is  to re-core my rad and add a fan shroud. But 
before I proceed with
my  re-core I need some more info on the shroud. Even though my car is a 
non a/c  car, it does
have a clutch fan, added, I assume by the previous owner(s).  What I need 
to know is apart from
the actual shroud, what other parts will  I need (brackets and other small 
items). I have an older
parts rad from a  60 or 61 Mopar (pt # 1904795) and it has brackets on the 
side that look like  they
may be for the shroud. If this is the case, before I send my rad out  for 
re-core, I should probably
have these brackets installed at the same  time. If these are indeed shroud 
brackets, could
someone who has a 62 with  a shroud measure the mounting center to center 
distance (vertical)
for me.  I’ve got a few feelers out for a OEM shroud and hope to have some 
luck. Would  any of
the club members have a spare one that they might want to part  with?
Thanks for all the great help, Charlie in  Ottawa


------------------------------------

To send a  message to this group, send an email  to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group,  send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server  instructions, go to  
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to  http://www.forwardlook.net/300-archive/Yahoo! Groups 
Links




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/