I'm restoring my '57 C and will be changing over to stainless fasteners wherever plausible. I've nitpicked for too many hours over a four page list of screws, bolts, washers, and nuts to cover what I need to replace virtually everything forward of the firewall with stainless - including the engine, but not the suspension. The set will be as close as possible to original look on the whole variety of fasteners, including indented bolt heads, correct lengths, and even "dog points" on the tips of the 1/4" body bolts as original. I'm obviously using information from my C, but most of it should be the same for a D. So here's the question - It will probably run several hundred dollars (for hundreds of pieces), but I wondered if anyone else would be interested in a part-by-part labeled kit for their own restoration project. Let me know before I get my orders finalized if you are interested. Email me or call me at 616-772-6000. Keith Boonstra ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/