[Chrysler300] Transmission shift points

[Mark Souders <MRS954@xxxxxxx>]

Hi guys,

This weekend I'm working on my 300H getting it ready to drive to Myrtle Beach in March. I had a little transmission fluid leak so I replaced that little o-ring on the shift cable, and replaced the internal filter screen. While I have the pan off, I thought I'd ask how can I adjust my shift points. The car shifts too early. The 1-2 shift happens when I'm going about 7-10 MPH and the 2-3 shift happens at about 25 MPH. I haven't seen any coverage of the adjustment in the service manual, except the throttle linkage adjustment. I've checked this adjustment several time over the past 7 years, but that doesn't seem to change anything. My 64 300 shifts just right. As a matter of fact, when I put my foot into it, every shift snaps me back in the seat. I need my H to do the same thing.

How do I make the adjustment? Can anyone give me some detailed instructions?

Thanks,
Mark Souders
300H
Mohrsville, PA







[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/