RE: [Chrysler300] long ram camshaft

["Knutsen, Mark C" <Mark.Knutsen@xxxxxxxxxxxxxxxxxxxxx>]

When I was going through my rebuild the camshaft that was recommended
was manufactured by Sealed Power. It is their part number CS-327. Here
are the specs for that cam:

Lift: .434 intake and .431 exhaust

                         Duration at .050: 206* intake and 209* exhaust

                         Centerline:    110* intake and 106* exhaust

                         Lobe separation angle:   113*

 

The part is listed under the Rockauto website.

 

 

-Mark Knutsen

 300G

________________________________

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of Robert Augliera
Sent: Tuesday, December 08, 2009 1:51 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] long ram camshaft

 

  

I am looking for the specs for the stock cam used in the 413 long ram.
Is there a preferred upgrade? Where can I purchase one. 

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/