Re: [Chrysler300] Exhaust Gaskets - 413

[Robert Merritt <okbobwynmer@xxxxxxxxx>]

Hi Pete,
I have installed manifolds withour gaskets but with a coating of aluminum paint as sealant and had good results, as long as the maniflod isn't warped.
Okie Bob

--- On Tue, 9/22/09, moparpjf@xxxxxxx <moparpjf@xxxxxxx> wrote:


From: moparpjf@xxxxxxx <moparpjf@xxxxxxx>
Subject: [Chrysler300] Exhaust Gaskets - 413
To: Chrysler300@xxxxxxxxxxxxxxx
Date: Tuesday, September 22, 2009, 10:55 AM


  



Hi Group:

Does anyone have a source for the multi-layered Fel Pro exhaust 
gaskets for the 1960-64 413's? I have contacted Federal Mogul, who now owns Fel 
Pro and they have informed me that they no longer produce the Multi layer 
gaskets for our cars. I was hoping that someone might have a local source. 
I have tried my local NAPA, Pep Boys, etc. with no luck. Thought I would 
ask you all before using the standard Fel Pro gasket which, according to 
experience, will last about two years. Any other suggestions will be gladly 
accepted.

Thanks,

Pete Fitch 

[Non-text portions of this message have been removed]

















      

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/