RE: [Chrysler300] Side Medallions

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

Doug,
 
The 300 numbers were pot metal and pins on the back of each pushed through
holes in the medallion and were fastened with push on retainer clips on the
back of the medallion.  The numbers are the same as was used on the decklid
on the 300G.
 
Bob J

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of 2HsandaHeritage@xxxxxxxxxxx
Sent: Sunday, August 02, 2009 10:08 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Side Medallions


  



Were the 300 numerals on the side medallions for the C thru G bolted on, or
were they molded into the plastic? 

Thanks, 

Doug Warrener 

Fair Oaks, CA 

300H 

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/