RE: [Chrysler300] 300H engines

[john begian <r2gthawk@xxxxxxxxx>]

Bob,
 
0.062" over the 413 bore gets you to a 426.

--- On Mon, 5/11/09, Bob Jasinski <rpjasin@xxxxxxxxxxx> wrote:

From: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Subject: RE: [Chrysler300] 300H engines
To: chrysler300@xxxxxxxxxxxxxxx
Date: Monday, May 11, 2009, 12:47 PM








Maybe I'm off base on this, but I've always thought the 426 wedge was a
bored out 413. If that is true, how far out would you have to bore out a
413 to make it a 426? Mine is bored .030" over so I know my cubic inch
displacement is more than 413 in my G. I sense a math lesson in the works
here.

Bob J

_____ 

From: Chrysler300@ yahoogroups. com [mailto:Chrysler300@ yahoogroups. com] On
Behalf Of john_nowosacki@ agilent.com
Sent: Monday, May 11, 2009 8:32 AM
To: bob@simplexco. com; chrysler300@ yahoogroups. com
Subject: RE: [Chrysler300] 300H engines

Most of my car books on Chrysler products show no availability of the 426 in
the Chrysler line. It appears the 413 (and 383 in lesser Chryslers) was used
right up through 1965 and was then replaced by the 440 in 1966.

Dodges and Plymouths appear to show 426 availability starting in 1963. There
is also the anomaly of the 413 in the Dodge 880, with was really a version
of Chrysler underneath that Dodge sheetmetal.

John Nowosacki

978-681-2219

Network Analysis and Troubleshooting Solutions

www.agilent. com/find/ nat <http://www.agilent.
<http://www.agilent. com/find/ nat> com/find/nat> 

Signaling Analyzer

www.agilent. com/find/ sart

____________ _________ _________ __

From: Chrysler300@ <mailto:Chrysler300 %40yahoogroups. com> yahoogroups. com
[mailto:Chrysler300 @ <mailto:Chrysler300 %40yahoogroups. com> yahoogroups. com]
On Behalf Of Bob Merritt
Sent: Monday, May 11, 2009 11:06 AM
To: Chrysler300 list
Subject: Re: [Chrysler300] 300H engines

I may be nuts, but I think I remember that in order to build product, car
manufacturers were (are) required to list the parts and pieces with an
agency before they start production. 

I can't think of the name.....might even be a government agency. I'm sure
George or Gil can tell me the name. 

I can't find it but I am 99% sure I have a book from Chrysler of the 62
parts and pieces and I remember, that the book shows the 300H could have had
the 413 engine or the 426. 

I am 99% sure no H's ever got the 426. It was just a situation that by
listing the 426 in the book, Chrysler could have used that engine if they
wanted to. 

Bob

----- Original Message ----- 
From: gary_r_23 
To: Chrysler300@ <mailto:Chrysler300 %40yahoogroups. com> yahoogroups. com
<mailto:Chrysler300 %40yahoogroups. com> 
Sent: Saturday, May 09, 2009 12:26 PM
Subject: [Chrysler300] 300H engines

Hello Club,
Can someone tell me which powertrain options were available on the 300H? I
am reading a book titled simply "Chrysler" by Dennis Adler published in
2000. It is supposed to be an overview of the history of Chrysler Corp.
cars, but not an encyclopedia of every car or its options. However when it
comes to the description of the 300's, it has the following to say about the
300H:

"The 300H came equipped with a 380 horsepower, 413-cubic inched V-8, or an
optional 426 that could be ordered in 373-, 385-, 413-, or 421-horsepower
versions!"

Can someone more knowledgeable enlighten me as to all these combinations of
426 engines?

Thanks,
Gary Runkel
Canton, MI

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]
















[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/