Re: [Chrysler300] Torque spec for 300H

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

Jim Maiani wrote:
> Mark,  My information shows for the base 380hp 413, (like mine) it's 450ft-lbs, and for the crossram 405hp 413 it's 470ft-lbs.  I'd love to know if my info is correct.  

> Jim Maiani
> Houghton Lake  (we finally hit 60 degrees   yea  )
> 300H

> From: Mark Souders 
> Sent: Thursday, April 23, 2009 11:26 AM
> To: Chrysler300@xxxxxxxxxxxxxxx 
> Subject: [Chrysler300] Torque spec for 300H

>  Guys,

> What is the torque spec for the '62 413 in my H? I have conflicting reports of 450 and 495 ft-lb. at 2800 RPM.

> Thanks,
> Mark

Are the quoted specs based upon the published factory figures?
AND how does that compare with any results gained from independent 
testing???   HuMMM??

Would the general public only have numbers from a private dyno session 
that they then shared with others, or are figures gained from a 
calculation mainly??


-- 
Paul Holmgren
Mine: 2 57 300-C's in Indy
Hers: 05 PT GT R/T HO
Hoosier Corps L#6


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/