Re: [Chrysler300] Rebuilting 1962 300 automatic
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Rebuilting 1962 300 automatic



Hi jerry;
It's really a pretty simple job. Several How to books out there to  
help. Paul's right with 3 to do, learn.
You must pay attention, but if you have a big bench, slowly un-stack  
the parts, it just goes back in the reverse. Replace all wearables  
with new as you re-stack it.
Watch your clearances, and have fun.
Ray
(I've done lots of them)

On Feb 16, 2009, at 12:11 PM, Paul Holmgren wrote:


I believe that I have read it here, if you have the space and the
information, and some mechanical skills, maybe it's time to learn about
doing it your self??

The cost might then fall in the $200-$300 range.

-- 
Paul Holmgren



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.