RE: [Chrysler300] 57 heater control valve

["Gary Nelson" <gnelson@xxxxxxxxxxxx>]

More on heater control valves.

Unless Bob J. has a magic wand, bending those little tabs is not as easy as
said. The 4 tabs are segments of a circle and must be precisely straightened
before you can remove from the base plate. I machined special tooling that
allows to lift the tabs. Another tool that flattens the 4 tabs to the proper
radius so the base plate can be removed. Then there is another set of tools
that progressively spread the tabs until they are flattened and clinched
down to complete the seal. Do NOT try to rebuild with a hammer and chisel.

By the way the capillary tube function will likely be useless. After 50 +
years the gas has dissipated. When they worked the gas expanded, pushed up a
piston and closed off the water flow based on the set temperature of the
slide control.  You will have to rely solely on the slide control for temp
comfort.

There is a guy in CA that does the rebuilds. They where $69 for a long time,
may be more now. He does nothing for the capillary tube. Just the seal.

If any one wants to see progress photos of 57 valve I have rebuilt, mail me
and I will send file photos.

Thank you,
Gary, the parts doc
Reno, Nevada 89521 USA
The Biggest Little City In The World
Mail: garythepartsdoc@xxxxxxxxxxxx
775 851-1420


  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of Bob Jasinski
  Sent: Thursday, January 15, 2009 3:53 PM
  To: 'Bill Leahy'; 'Chrysler300 list'
  Subject: RE: [Chrysler300] 57 heater control valve


  Bill,

  There are kits available that include the rubber diaphragm that allow you
to
  rebuild the valve. The valve is disassembled by bending the little tabs
  that hold it together, and basically you clean everything up, put in the
new
  diaphragm and reassemble. There are companies that will do this for you
  also, and that may be a simpler way to go.

  New valves are also available, (check NAPA) there are some issues with the
  new valves however. The issues are that they are steel, not brass, and
they
  do not include the temperature sensing bourdon tube the originals came
with.
  I would rebuild the original if it were my car, as I have had both and
  prefer the original. Others may have a source for the kit and/or
rebuilders
  but you might try looking in Hemmings or Google search. My car is a 300G
so
  I can't say for sure the '57s had the bourdon tube, but I'll bet they did.

  Bob J
  _____

  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
  Behalf Of Bill Leahy
  Sent: Thursday, January 15, 2009 3:11 PM
  To: Chrysler300 list
  Subject: [Chrysler300] 57 heater control valve

  one of the many things to improve or still fix in the first place is my
  heater control valve / it leaks badly.

  so, i finally have it out of the car and it looks like trouble trouble
  trouble / rusty and carroded.

  are they fixable or do ya replace them suckers?

  or do ya block them off and close one eye?

  billllllllll in not so sunny kennewick washington

  [Non-text portions of this message have been removed]



  


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/