Hi Group, I am cleaning the metal shells of the 64 300 bucket seats. I noticed an off color paint, so I prepped the shell with a scotch pad and proceeded to apply a brite white acrylic enamel. I noticed that the enamel was creating "fish eyes" , which can't be filled in. So I removed the paint with a rubbing of Acetone. And repeated the process. Again, fish eyes were looking back at me. I hopped over to the nearest auto store and purchased acrylic lacquer. After a small test area, fish was back. I then proceeded to use a chemical stripper, which removed the rogue paint, and left the shell with the "pearlescant white " . Now I noticed a tear in the lower section, and it turns out to be a vinyl/rubber factory coating with the a wrinkle finish. Has any body found the same on their seats? Can this vinyl be re-applied? thanks,Dave [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/