Tom, Does someone make them? The only ones I know of are for '62 and newer with the cast iron torqueflite. They don't fit earlier cars. Bob J _____ From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Tom Cox Sent: Friday, December 12, 2008 4:31 PM To: 'Chrysler 300 list service' Subject: [Chrysler300] Gear Reduction Starters Is there a consensus on using a high-torque gear reduction starter on a standard 300F engine? I have seen Roadrunner starters discussed but see that they are based in New Zealand. Any thoughts? Thank you. Tom Cox [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/