Hi All: I sent my 300F unit to A-K for rebuilding. It was in pretty bad shape, so they made a new one for me. I was kind of disappointed when I received it, as it bore almost no resemblance to the original (Much smaller with a cork float). However, it DOES seem to work ok---once I replaced my defective I/P gage. Also, the man I talked with there was certainly knowledgeable on the subject. Good info on cleaning the tank and on how one can have such an electrical gadget in the tank and no fireworks! 300ly, Gil C. Talla, FL In a message dated 6/13/2008 10:34:05 PM Eastern Daylight Time, gbarker@xxxxxxxxxxxx writes: I found my sending units in the same box they were shipped in. The Company that made them was Atwater Kent. The return address on the box is : J.F. Sullivan Company. 14 Clarendon Rd. Auburn, MA. 01501 Do we have a MA member who knows of this Business. Gary Barker **************Vote for your city's best dining and nightlife. City's Best 2008. (http://citysbest.aol.com?ncid=aolacg00050000000102) [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/