Re: [Chrysler300] 300 D AC finshing touches!......& Fuel Pump issues!!

[moparpjf@xxxxxxx]

In a message dated 3/21/2008 8:59:07 PM Eastern Daylight Time, 
marianne@xxxxxxxxxxxxxxxxxx writes:

Thanks for lead on Mitchell Motors. Had a few other good list member
leads on rebuilders of these parts. But if you don't have a spare core,
it's a problem with rebuilders.

Mitchell motors can be pretty expensive.  As far as cores for rebuilders go, 
they will usually rebuild yours if you are willing to wait for them to do it.  
The cores are for swap purposes.
 
Regards,
 
Pete Fitch



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/