Re: [Chrysler300] F parts

[lettercars@xxxxxxx]

Hi Johnnie and All:
Gary Goers reproduces the "ribbed" 300F-H console tops.  I used his in  my F. 
 Quite pleased with them.  Did have to relocate two of the holes  for the 
aluminum trim strip attachement bolts.  They come as straight  pieces, but with 
care, they bend to the correct shape fine.  It would be  impossible to restore 
most console tops because they are commonly very  scratched.
For the AL strips, I used Ano-Brite, Inc in California to do my  originals.  
Cost at that time (3/06) was $450.  Again, I was quite  pleased, although 
there were a couple deep defects that were not filled, and  consequently still 
visible.  They have apparently changed ownership or  something, as the web site I 
had is no longer applicable.  The one  referenced is now: 
_http://www.kingoftrim.com/_ (http://www.kingoftrim.com/) 
I don't know how anyone could restore the heel plates without  
removing---sanding I suppose---large amouts of metal.  Obviously, they are  always full of 
deep scratches.  (I haven't installed any yet in my  car!)  There was someone 
at the Asheville meet that was going to reproduce  them, and actually had a 
sample there, but I never heard of those plans  materializing.
300ly, Gil C.
 
 
In a message dated 3/3/2008 1:52:54 PM Eastern Standard Time,  
Jslayton@xxxxxxxxxx writes:

Is  anyone reproducing the trim on the top of the consoles -----F---?-----how 
 about the aluminum strips which go on each edge ? If not, can anyone 
recommend  where to send the strips and also the heel pad mouldings to be  
restored------thanks-----Johnnie Slayton








**************It's Tax Time! Get tips, forms, and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/