Hi Group- For my 1958 300-D restoration, I'm looking for the formed narrow sheetmetal piece that goes under the grille and above the bumper, and connects the right & left panels that contain the brake cooling ducts. My panel in question had all the rust removed (by www.autorestorationdepot.com), which revealed a pretty ragged edge that may or may not be hidden when installed on the car. Does anyone have an extra I can buy/trade for? My rocker panel question - are there weep/drain holes on the horizontal part of the rocker panels on the 1958 two-door hardtop body? There certainly are a couple factory rocker panel drain holes on each side of my four-door 1957 Saratoga parts car. Regards, John Spiers Lake Worth, Florida --------------------------------- Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/