Here's another suggestion for your cosideration: How about the lower front fender panels for the 57-58-59. This would be the curved sheet metal part that 1/2 of the brake air scoop and extension mount on each side. I have 2 D's and a C and they all need repair on this piece due to rusted out holes behind the scoop extension mldg. I see no reason this could not be made from fiberglass as it simply bolts to the fender and lower rad surround Surely we have some folks in the club that work with fiberglass or possibly know of someone that does and may be could do mold making and glass work on the side. Dave Schwandt [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/