Fw: [Chrysler300] Possible project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: [Chrysler300] Possible project



----- Original Message ----- 
From: "Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
To: "Richard Osborne" <richard@xxxxxxxxxxxx>
Sent: Thursday, November 29, 2007 7:57 AM
Subject: Re: [Chrysler300] Possible project


>I thought someone in Sweden was involved with a gas tank repro project. 
>Mike Burke has had contact with them I believe.  How bout it mike, any news 
>on that front??  I'm still in the market for a couple of those ('57-'58)
>
> I  myself, would like to see a CORRECT  repro panel for the lower front 
> portion of the '57-'59 1/4's as well as 60-62.
>
> Dave Schwandt
>
>
> ----- Original Message ----- 
> From: "Richard Osborne" <richard@xxxxxxxxxxxx>
> To: "Bob Merritt" <bob@xxxxxxxxxxxxx>; <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Thursday, November 29, 2007 7:16 AM
> Subject: Re: [Chrysler300] Possible project
>
>
>>I think that as long as there is someone (JC Auto) making these things, 
>>the club should focus efforts elsewhere. There are so many items that are 
>>not available for these cars, I think it would be best to focus on the 
>>things that are not available, even if the price might be better from the 
>>club. Jeff has done a good job of servicing members of the club. Wes hould 
>>appreciate what he has done.
>>
>> Best regards,
>>
>> Richard Osborne
>>
>>>>> "Bob Merritt" <bob@xxxxxxxxxxxxx> 11/28/07 1:15 pm >>>
>>
>> I have been asked to forward the following message:
>>
>> +++++++++++++++
>> The Restoration Committee is considering reproducing the manifold
>> "block- off" plates for the '60, '61, '63 and '64 ram cars.  Initial cost
>> projected for sale would be about $75.00 per pair plus postage.
>> We would like to get a response from the members to see if these would be 
>> an
>> item they need.
>>  The Restoration Committee
>> +++++++++++++++
>>
>> You can forward replies to me and I will aggregate, accumulate, spindle 
>> fold
>> and mutilate. I am especially good at folding.
>>
>> Rrr
>>
>>
>>
>>
>>
>>
>>
>> To send a message to this group, send an email to:
>> Chrysler300@xxxxxxxxxxxxxxx
>>
>> For list server instructions, go to 
>> http://www.chrysler300club.com/yahoolist/inst.htm
>>
>> For archives go to http://www.forwardlook.net/300-archive/
>> Yahoo! Groups Links
>>
>>
>>
>>
> 



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.