I think I'd rather have convertible tops and top bows/arms, etc. reproduced. I worry about the metal parts of my top going up and down, whereas the block off plates haven't moved since 1961 and just sit there, so they should never need replacing. ________________________________ From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Bob Merritt Sent: Wednesday, November 28, 2007 1:15 PM To: Chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] Possible project I have been asked to forward the following message: +++++++++++++++ The Restoration Committee is considering reproducing the manifold "block-off" plates for the '60, '61, '63 and '64 ram cars. Initial cost projected for sale would be about $75.00 per pair plus postage. We would like to get a response from the members to see if these would be an item they need. The Restoration Committee +++++++++++++++ You can forward replies to me and I will aggregate, accumulate, spindle fold and mutilate. I am especially good at folding. Rrr [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/