
[Chrysler300] wiper trans pivot
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Chrysler300] wiper trans pivot
- From: david dumais <dvd_dumais@xxxxxxxxx>
- Date: Sun, 28 Oct 2007 07:29:07 -0700 (PDT)
Thanks Group for your input on my leaking wiper pivot shafts. I knew I had a pair in the barn. After searching thru a dozen or so boxes, bingo! Here's what I see for sealing:
The foam rectangular gasket between flange and firewall ( which could be fabricated from old
bike tire tube), a rubber seal of sorts at the base of the pivot, above the flange surface.
I'm thinking this could be duplicated with black RTV about 1/4" diameter evenly around base of shaft. And both mounting bolts appeared to be sealed at hex head side of flange.
Found pairs of door handles which need re-plating, and odd's and ends of small body parts
etc.
Thank the Gods for storage.
thank you'all 300K ly Dave
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[Non-text portions of this message have been removed]
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap