[Chrysler300] 300C carb linkages etc

[Tony Braams <tonybraams@xxxxxxxxxxxx>]

Hi 300 group,
I am wondering if anyone possibly has a picture they could e'mail me of 
the firewall bellcrank to rear carb linkage of a '57 300C.  Also the 
centre to centre pivot measurement, would be a help.
I am trying to positive i.d. that linkage.
I am also trying to source -
1. a connecting rod link between the 2 carbs.
2. carb. return spring brackets.
3. brake vacuum and neutral switch fittings from the intake manifold.
4. a good complete baseplate or a complete frozen rear WCFB carb. I just 
need the pivot linkage bracket off the drivers side of the throttle 
shaft, as mine is incorrect, maybe a 300B or other. I can send a picture 
to i.d.
If anybody can help with some of these parts, I'm quite happy to pay the 
going rate.
Please reply to -
tonybraams@xxxxxxxxxxxx
Thanks, Tony in Oz.


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/