RE: [Chrysler300] Setting up 6V optima
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Setting up 6V optima



GENTLEMEN,

Where can I locate the Studebaker/Packard exhaust tips that replicate the
1955 300 exhaust tips, for #N551301?
Thanks for the help.

Bill Madden

  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of johnl
  Sent: Monday, September 10, 2007 2:14 PM
  To: Chrysler300@xxxxxxxxxxxxxxx; Mke Galassi; Warren Anderson
  Subject: Re: [Chrysler300] Setting up 6V optima


  Hi Warren,

  I have used Optima batteries for years with very good success. Only one
used in a modern daily driver failed on me.

  Currently I have two 6 volt Optima's in use. One in my '55 NY T&C that was
there when I purchased it over three years ago. It has always performed
great and I've not touched the regulator. The other was new when I finished
the restoration on the '55 Imperial Newport which is probably five years
now. Also that battery sat around for probably a year before it was ever put
into use.

  On the 6 volt Chryslers you can purchase a battery box through Packards
International http://www.packardsinternational.com/. This box looks very
close to a tar top battery and is designed to accept the Optima 6 volt
battery. The only difference is the location of the battery post. I did have
to replace the cables as one was to short and the other to long.

  I know this doesn't answer your question about adjusting the voltage, but
I'm not sure you really need to.

  John Lazenby

  1955 Chrysler New Yorker Deluxe Town & Country
  1955 Imperial Newport
  1955 Chrysler C300 Tango Red
  1956 Chrysler 300B Cloud White
  1957 Chrysler 300C Coupe Raven Black
  1960 Chrysler 300F Coupe Alaskan White
  1963 Volkswagen Beetle Black
  2001 BMW ///M5 (A Modern Super Car)
  http://www.bmwmregistry.com/model_faq.php?id=18

  ----- Original Message -----
  From: Warren Anderson
  To: Chrysler300@xxxxxxxxxxxxxxx ; Mke Galassi
  Sent: Monday, September 10, 2007 1:57 PM
  Subject: Re: [Chrysler300] Setting up 6V optima

  I finally became tired of lead acid battery leaks and other problems and
purchased the antique auto battery optima package. Per the installation
instructions, unless the regulator is set to deliver 2-3 amps after the car
is driven 5-10mi. Charge rate should not exceed 7.2 V at 1500rpm. All to
prevent overcharging which voids the warranty. The shop manual suggests the
current regulator is set to deliver 43-47amps, a long way from 2-3 amps. Has
anyone successfully been able to reset theirs to meet the optima specs. If
so how?

  DC generator can develope very high current and an AC generator is self
limiting inheirently. DC generators therefore need cutout contacts.

  Following storage, charging system may well be called upon to replenish
above the 2-3 A specified for 20+ miles at 7.2 V. So, this does puzzle.

  Now, if the battery is at full charge, the car is started and run 5-10
miles, then at proper regulation 7.2 V, current should then be 2-3A. This, I
challenge, is what is meant. No adjustment should be made to the current
cutout, I would say.

  SedWarren Anderson
  Sedoana_.___
  Messages in this topic (1) Reply (via web post) | Start a new topic
  Messages
  To send a message to this group, send an email to:
  Chrysler300@xxxxxxxxxxxxxxx

  For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

  For archives go to http://www.forwardlook.net/300-archive/

  Change settings via the Web (Yahoo! ID required)
  Change settings via email: Switch delivery to Daily Digest | Switch format
to Traditional
  Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe Recent
Activity
  a.. 1New Members
  Visit Your Group
  Y! Sports for TV
  Game Day Companion

  Live fantasy league

  & game stats on TV.

  Yahoo! Finance
  It's Now Personal

  Guides, news,

  advice & more.

  Yoga Resources
  on Yahoo! Groups

  Take the stress

  out of your life.
  .

  [Non-text portions of this message have been removed]

  ----------------------------------------------------------

  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.485 / Virus Database: 269.13.13/998 - Release Date: 9/10/2007
8:48 AM

  [Non-text portions of this message have been removed]



  


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.