Hi all, Further parts needed is certainly always a problem but also kind of a thrill looking for to source in order to keep the old ones alive or brought back again to life. A constant search but from reading on late comments I can´t keep from asking; Why not the Great Goers for to source some of the stuff needed? Someone did go through a lot of work and took on the cost of tooling to do repro casting moulds for to do repros of rare parts for our great old cars and finished parts are now promoted through Gary Goers so why not use the opportunity given? To re-plate old pitted stuff is down to craftsmanship and from what I have seen could go much worse than a decent repro casting. Parts like the desired 57-59 air brake bezels and brake scope extensions, the medallion bezels for trunk, glove box, even side medallion ones 57-61 are all listed at Garys Parts list and is in my opinion and compared to the cost of refurbish old pitted stuff certainly priced reasonable. www.tomandgaryinc.com/garygoers Not to forget the great Desoto George from down under for ditto repro plastic lenses needed. Best regards Ulf Larsson, Sweden. 3N57 2660 etc [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/