Re: [Chrysler300] 1960 Battery Hold-down Question

[lettercars@xxxxxxx]

Hi All:
Just a couple last things about the hold down.  Mike Reed sent me a  picture 
of the Atlas product.  It certainly is close to the correct  original.  Only 
difference I could spot was the ends of the "Z" component  were a little 
shorter than the original which extend to the center of the 2nd  hole.  Also, the 
right side "hook" was not Cd plated.  Neither were  the wing nuts.
A couple of additional items:
--George Riehl informed me that, yes, the 300G left hold down rod is  painted 
body color, as are all the succeding cars thru the 300L.
--Just a note that the 300F battery shelf/support was black enamel----ie,  
painted separately, whereas the later cars are painted body color.
'nuf said of this subject?  Hopfully!!
300ly, Gil Cunningham



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/