Re: [Chrysler300] 57 C power window regulator drivers side

[Ray Jones <hurst300@xxxxxxxxxxx>]

On Jul 17, 2007, at 8:10 PM, <john_nowosacki@xxxxxxxxxxx> wrote:

  I could try and mickey mouse something with large washers, etc., but I 
thought I'd ask for some advice.

John, you could use some JB Weld and washers for a semi-permeant  fix, 
or braze/spot weld the washers in place.

  Also, I think I lunched a speedometer cable on the way back as well, 
as the needle fell to zero after some not nice noises.

You might look and see if the shop shoved, jammed, or otherwise moved 
the cable out of the way. It may just be a little kinked for 
"clearance".

Ray

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/