Re: [Chrysler300] Power Brake Booster

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

  Best way to answer question is to measure one in your car. Loosen two nuts that secure master cylinder to booster, pull cylinder forward and measure how far rod sticks out (mounting surface to end of rod). Need to verify that when replacement is back on car that there is some free travel, rod to master cylinder piston. Manual will tell you how much (0.030 - .060"?). 

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/