rob kern wrote: >We used a motorcycle oil filter gasket for the tank/sending unit seal on my C and it has been leak free for almost 4 years. ROB KERN > ----- Original Message ----- > From: Rich Barber > To: 'David Zakarian' ; 'chrysler club' > Sent: Monday, June 25, 2007 8:29 PM > Subject: RE: [Chrysler300] gas tank on 58D/55 C-300 > > > My '55 C-300 has an O-ring between tank and sending unit, but I have not > been able to find the correct one. Anyone have any guidance on > OD/ID/material/source? Plumbing/water O-rings don't hold up to CA-soline > and I haven't been able to find a suitable hydraulic O-ring. > > C-300'ly, > Rich Barber > Brentwood, CA > 1955 Chrysler C-300 > > -----Original Message----- > From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On > Behalf Of David Zakarian > Sent: Monday, June 25, 2007 2:49 PM > To: chrysler club > Subject: [Chrysler300] gas tank on 58D > > Here is the question, Is there a gasket between the flange of the send unit > and the gas tank? It seem like that should be but the diagram in the service > manual does not show one. > > Zak > > -- > I am using the free version of SPAMfighter for private users. > It has removed 610 spam emails to date. > Paying users do not have this message in their emails. > Get the free SPAMfighter here: http://www.spamfighter.com/len > > [Non-text portions of this message have been removed] > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to http://www.forwardlook.net/300-archive/ > Yahoo! Groups Links > > > > > >[Non-text portions of this message have been removed] > > > >To send a message to this group, send an email to: >Chrysler300@xxxxxxxxxxxxxxx > >For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm > >For archives go to http://www.forwardlook.net/300-archive/ >Yahoo! Groups Links > > > > >______________________________________________________ >This email was pre-scanned by Spam Guardian >A Service Provided by http://www.foothill.net > > > I'm getting ready to replace the Gasket on my 55 Also. Leaks like a sieve. I thought of trying to use a piece of heavy gasket material. I haven't removed the plug yet. Gary Barker To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/