[Chrysler300] 1959 300 E parts

["John@xxxxxxxxxxxxxxxxxxxx" <John@xxxxxxxxxxxxxxxxxxxx>]

Hi club,
 
I am helping someone with some minor restoration work on their 300E.
There are several parts that I need that I fear are nearly impossible to
get:
 
1)       On the inside door arm rests (drivers and passenger side);
there are plastic inserts that act as a guide for the door handles.
Both in this car are badly cracked.  Any idea of where I could find some
replacement or NOS ones?
2)       The rear fenders have curved trim above the wheel wells.  Both
pieces of trim are pretty badly beat up.  I spoke with Jeff Carter and
he says that the trim can also be found on New Yorkers and Desoto's (if
I am remembering the conversation correctly).  I need two pretty good
ones that don't have dents and hammer marks.
3)       The exterior door handles are very poor and while they might be
able to be rechromed, if anyone has a set that are done, I would gladly
buy them.
 
Any help is greatly appreciated.
 
John


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/