Re: [Chrysler300] Subject: Electric Window Motors

[Ray Jones <hurst300@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>]

Lube, lube, lube. Lube the tracks (runs try Silicone spray) and all the 
pivot points in the lift (use white grease).
If you have the lift out of the car, do NOT remove the motor without 
clamping the arms down. The motor is under high tension, and if you 
unbolt it and pull it off, that releases the spring. That coil spring 
will whip a lift arm around fast and hard and can harm or kill you.

Good Luck, Ray (with a dent in my forehead from doing the above, too 
many years ago!!)


On Nov 29, 2006, at 8:23 AM, Chrysler300E@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx wrote:

> Good AM to everyone out there in 300  Land:
>
> The electric window motors for my front windows  seem to be slowing 
> down -
> getting old I guess.  Any creative remedies out  there???
>
> Tom
> Miami, Florida
> 1959 300E
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/
> Yahoo! Groups Links