[Chrysler300] O rings for trans

[Paul Martin <paul_martin78ca@xxxxxxxx>]

The trans in my 300F was re sealed in July and the
shop gave me the gasket package with any extra
pieces,however the o rings were the wrong size for the
trans cable sleeve and the safety switch. I got other
o rings from a parts store but thay are not sealing
properly )not thick enough).
Can anybody gibe me direction on obtaining the correct
size o rings so I can stop the drips.

Paul Martin
300F
Vancouver BC

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/