[Chrysler300] 300C Rear End

["Mark Schueller" <f41324@xxxxxxxxxxxxx>]

Greetings All:

Thanks to help from a number of club members, I now know that the carrier (pumpkin) in my rear axle is early '60s Mopar with a pinion shaft diameter of 1-3/8".  Does any one know what the pinion shaft diameter of the 300C is or should be?  Pinion shaft diameter (cross sectional area) indicates the strength of the unit.  I don't know why any body would know this "off the cuff" but I thought I'd ask.  :-)

Thanks.

Mark Schueller
300C, 300F
    

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/