Should not be a big deal to re-pro these. It's just a piece of flat sheet bent with a small die. I imagine the weight may be critical is all. Re-pro commitee are you listening?? Dave Schwandt ----- Original Message ----- From: "John J. Hertog" <crossram@xxxxxxxxxxxxx> To: "'Tomas Turovaara'" <tomas.turovaara@xxxxxxxxx>; <Chrysler300@xxxxxxxxxxxxxxx> Sent: Wednesday, October 18, 2006 7:06 PM Subject: RE: [Chrysler300] 61 300 g > Hi Tomas, > > Both the 300F and the 300G use the same 2903S Carter AFB carburetors. The > only difference would be in the date code (which nobody cares about in > Club > concours - yet! ). > > Jeff Carter, indeed, may be able to help you with some of the exhaust heat > riser parts you mention. Finding the counterweight for the passenger side > is nearly impossible - it is a mirror image of the left side unit and > pretty > much only used on ram cars - therefore it is very rare . Hopefully > someday > someone will reproduce that part. www.jcauto.com > > Another source of heat riser parts is Brad's NOS parts. > http://www.bradsnosparts.com/ ; some years ago, I purchased some new > reproduction shafts from him, as well as bushings., etc. > > John Hertog > Sag Harbor NY > > _____ > > From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On > Behalf Of Tomas Turovaara > Sent: Wednesday, October 18, 2006 12:07 PM > To: Chrysler300@xxxxxxxxxxxxxxx > Subject: [Chrysler300] 61 300 g > > > > Name Tomas Turovaara > > Address Kengisgatan 33 > S-981 33 Kiruna > SWEDEN > > Phone 46-980-14149 fax 46-980-66404 > E-mail tomas.turovaara@ <mailto:tomas.turovaara%40telia.com> telia.com > > Hi 300 club > Is there any one known where I can find parts to the heat control valve on > the exhaust manifold to a 300 G I need the counterweight ,thermostatic > coil, > valve, stop stud and valve shaft to left and right side. > Regards from Tomas > > > To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/