[Chrysler300] Removing front medallion

[dan300f@xxxxxxx]

Hi all:

I sent this to Brandt for his information, but perhaps someone else may use 
my technique to remove the medallion.

When I removed the medallion on my F, I used a hair dryer and a feeler gauge. 
 As the adhesive behind the medallion warmed up, I gently nudged the 
medallion from side to side using the feeler gauge.  You'll have to test to find which 
thickness of feeler gauge you need.  When the adhesive gets warm enough, you 
should be able to slip the medallion out of the grill centerpiece.  But take 
your time and don't over pry with the feeler gauge.  Be patient, it will come 
out.  It took me about 10 minutes and not additional damage to the medallion 
than what was already done.

By the way, is anyone out there in 300 Land interested in a 1976 Chrysler 
NYer Brougham?  I am selling mine.  Asking price is $1,300.  92K+ miles on the 
speedo.  Reply off-list please.

Dan Reitz
Northridge, CA


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/