[Chrysler300] Removal of F bucket seats - reply
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Removal of F bucket seats - reply



Hi Pete, 

A single bolt it is - need 9/16th socket if memory serves me right. Bolt is
located at rear of seat (where it pivots - makes sense) and goes from the
bottom, upwards.  Just reach UNDER the back of the front seat bottom, at its
center. Once the bolt is removed, lift the rear of the seat, and it will
come out easily. Don't lose the little round "rollers" that are supposed to
stay located on theseat frame, but have a bad habit of disappearing. 

John Hertog
Sag Harbor NY

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of moparpjf@xxxxxxx

Hi group:
 
    Can somebody please tell me how the front seats  release from the frame 
in my F?  I have been looking for a single bolt in  the center of the back
of 
each seat, but cannot find any bolts there.
 
    Your help will be appreciated.
 
Thanks,
 
Pete Fitch




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.