Re: [Chrysler300] 413 Rebuild

[mrmopar66@xxxxxxx]

Mark:
 
I used to live in Rockford, IL.  I know of the place you mentioned, but I have no experience with them.  However, I used to go to a place called Service Dynamics.  They are located in either Grayslake or one of the towns just below Grayslake.  Might be considered Mundellein at that point.  Somewhere around where route 45 and route 137 meet.  Their work was impeccable and their prices were reasonable.  It's been a couple of years since I have used them and I am assuming they are still there.  If I were still living in that part of the world, I would certainly be using them.  Good luck with your project and I hope you track them down.
 
Ian Carlton
66 300 Conv
79 New Yorker 5th Avenue
66 Ply Barracuda
 
-----Original Message-----
From: mplindahl <mplindahl@xxxxxxxxxxxxx>
To: Chrysler 300 club <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Fri, 24 Feb 2006 07:33:13 -0600
Subject: Re: [Chrysler300] 413 Rebuild


Hi All,

Has anyone in IL or WI used Snooks Racing Engines for rebuilding an engine?
I stumbled upon them and saw their shop.  They are next to the Rockford (IL) 
Speedway.
I also have a T41 413 engine from a New Yorker that I want to put in my '63 
300 Conv.

I found this article on the web.  Based on what I saw, they seem like they 
would do a great job.
http://www.whowon.com/RF_Results.asp?TrackID=714&StoryID=102694

If anyone knows of another good rebuilder in the NW suburbs of Chicago, 
please let me know.
Rockford is about 60 miles away, but it may be worth the ride.

Thanks-
Mark Lindahl
Barrington, IL

----- Original Message ----- 
From: "Tim Tomlinson" <tomlin@xxxxxxxxx>
To: "Chrysler 300 club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Thursday, February 23, 2006 11:49 PM
Subject: [Chrysler300] Truck engine?


> Group,
> 1.  The machine shop I am using for rebuilding my 64 300-K 413 engine has 
> another 413 on a stand.  It is designated as
> T 41   and 2-1.  I suspect the T means it is a truck 413, and the 2-1 is 
> the build date.
> 2.  Anyone know for sure based on the stamping?
> Thanks
> Tim Tomlinson
> PS  The stamping is on the boss at the driver side front of the engine.
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
> 



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 

Yahoo! Groups Links



 


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/