[Chrysler300] ram exhaust manifold supports - reply

["John J. Hertog" <crossram@xxxxxxxxxxxxx>]

I do believe Mike Laiserin has reproductions all made up and ready for sale. 
mwl1967@xxxxxxx

John Hertog
----- Original Message ----- 
From: <lettercars@xxxxxxx>
To: <crossram@xxxxxxxxxxxxx>; <greektruck@xxxxxxxxxxx>; 
<Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, November 21, 2005 7:46 AM
Subject: Re: [Chrysler300] ram supports - reply


>
> Hi Tim:
> If it is the exhaust manifold steady brackets you are missing, I can 
> supply
> you with a copy of the drawing and you can have them made.  The left and
> right are identical (pn 2202426) and attach to the engine at two of the 
> oil pan
> screw locations on each side, as John has explained.  When I bought my 
> 300K  in
> the '70's they were missing so I had to have mine fabricated.  Send me 
> your
> address if this is what you need.   300ly, Gil Cunningham
>
> In a message dated 11/20/2005 2:04:33 PM Eastern Standard Time,
> crossram@xxxxxxxxxxxxx writes:
>
> Hi  Tim,
>
> There is no support as you describe.  The rams are  "supported" by the 
> heat
> elbows and heat tubes.  Actually, rams are  even OK without those, and can 
> be
> self-supporting even though not intended  that way.
>
> On 300J's and 300 ram 300K's ONLY  (not on 300F and  300G)  there are two
> brackets that attach from the bottom of the  EXHAUST headers to oil pan
> bolts..  maybe you are thinking of those  ?
>
> John Hertog
> Sag Harbor NY
>
> ----- Original Message -----
> From: <greektruck@xxxxxxxxxxx>
> To: "300 club"  <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Sunday, November 20, 2005 1:33  PM
> Subject: [Chrysler300] ram supports
>
>
>>i have the service  manual, but cannot find a picture of the supports for
>>the rams. i was  told there once was a support on each ram, that goes to 
>>the
>>bottom of  the engine somewhere to support the area of the carbs. i cant
>>find  pictures, nor holes on the rams to support this. i will make them
>>myslef but i would like them to be correct in shape and stuff. if its  not
>>to much bother, can someone please send me a web site, or picture,  or 
>>even
>>mail me a picture, something, so i can do this?... i am not  talking about
>>the heat tubes from the exhaust to the bottom of the  rams by the way, 
>>just
>>in case someone suggests that. i have those.  thank you much for any help,
>>tim
>>
>>  [
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
>
> 




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/