That's it, Paul Mike in Lake Odessa, Michigan ----- Original Message ----- From: Paul Weihl To: Chrysler300@xxxxxxxxxxxxxxx Sent: Sunday, July 31, 2005 21:07 Subject: [Chrysler300] 2903 Carburetors I am trying to locate the "Idle By-Pass Air Bleed Screw" referenced in the service manual. The manual does not identify its location. I'm guessing it's the large screw located between the two Mixture Screws. Is this correct, or is it something else? Thanks in advance. Paul 300G [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm SPONSORED LINKS Chrysler 300 Chrysler sebring Chrysler town country Club international ------------------------------------------------------------------------------ YAHOO! GROUPS LINKS a.. Visit your group "Chrysler300" on the web. b.. To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. ------------------------------------------------------------------------------ [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/