Try the following website. I think that they may have a kit. http://www.thecarburetorshop.com/ Charlie Valentine, PA ----- Original Message ----- From: <lawsonmem@xxxxxxx> To: <chrysler300@xxxxxxxxxxxxxxx> Sent: Sunday, July 10, 2005 8:57 PM Subject: Re: [Chrysler300] rebuild kits for 1963 Carter AFBs, 3505S: 300J > Does anyone know where I can get rebuild kits for Carter AFB 3505S > carburetors (manual chokes), the stock carburetors on the 1963 300J? > > I have tried NAPA, Auto Zone, Kragen and a local speed shop, all to no > avail. As well as going to the local NAPA, I have used the NAPA tech > e-mail with > no response from NAPA. A friend of mine told me to go to another NAPA > store > because some are sharper than others. I will try that. > > The clerks a Auto Zone and Kragen responded like deers in my headlights. > I > seriously don't think they could tell a carburetor from a voltage > regulator. > > Thanks in advance for any assistance you can give me, > > Marty Lawson > 909-618-4286 > > > > > [Non-text portions of this message have been removed] > > > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > Yahoo! Groups Links > > > > > > > To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/