Re: [Chrysler300] C- D engine

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

smopar@xxxxxxxxxxxx wrote:

> I would be cautious about anyone who puts EGGE pistons in an engine.  My sources say they are not for serious driving.  At least check them out with others and replace them if you end up with this engine.  
>Steve Albu
>
>---- George McKovich <george@xxxxxxxxxxxx> wrote: 
>  
>
>>The engine number that the seller emailed me does not appear
>>to be a valid number. He says it is:
>>
>>3NE5714157
>>
>>I believe the engine numbers run from 3NE571001 to something
>>less than 3NE579999, not something in the 14000 range.....
>>Correct me if I am wrong on that point.
>>
>>George
>>    
>>
snip

>>Hey Guys check out EBAY no.
>>4550998226  Bill D in NJ
>>    
>>
Thats not the right choke plate on the carb either.
(Personal opinion,  thats a New Yorker block)

-- 
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps L#6



------------------------ Yahoo! Groups Sponsor --------------------~--> 
In low income neighborhoods, 84% do not own computers.
At Network for Good, help bridge the Digital Divide!
http://us.click.yahoo.com/B9pRWD/3MnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/