Thank you to all that responded. I have a complete repair kit on the way from Bernbaums' ($175). I had it shipped for Monday arrival so that I hopefully can have the swap made before I leave on Wed. for the Meet. Thanks again, Richard Osborne >>> "Richard Osborne" <richard@xxxxxxxxxxxx> 05/13/05 1:13 PM >>> Good Morning, I just put the G up on a lift to "nut and Bolt" it, ensuring that all is tight prior to its first major drive next week, to the Michigan Meet. All looked good except I found the ball and trunnion to have much more "slop" than I would care for. I know these have been hard to find, but I thought I remembered someone stating a while back that there was a new supply of these? Was it Andy Bernbaums' (sorry for the spelling)? Does any one have a set that may be going to the MI Meet that is willing to sell? Does the drive shaft need to be balanced after replacing this? Can I swap this out in the parking lot? Thanks for your help. This drive shaft was supposedly rebuilt while I had the car apart for restoration. Best regards, Richard Osborne Cols. OH To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links ------------------------ Yahoo! Groups Sponsor --------------------~--> Has someone you know been affected by illness or disease? Network for Good is THE place to support health awareness efforts! http://us.click.yahoo.com/0xaSZB/UOnJAA/Y3ZIAA/8LmulB/TM --------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/