Hi Group, I need to remove the oil pressure gauge from my 1960 and I would like to know if someone knows a trick to get it out without removing the whole astrodome setup. In trying to remove it from the bottom, there is a long black piece of plastic covering up part of the gauge base which prevents the gauge from just dropping down. It looks like the purpose of the obstructing piece may be to protect the counterweight on the end of the speedo needle. I have removed the two screws holding in the black piece but can't get it to move without cracking it. Suggestions? OK, while you're thinking about astrodomes, does anyone know the proper way to lubricate a noisy speedo cable? Mine growls until I've been driving about 10 or 15 minutes then quiets down, but it's getting a little embarassing. Thanks, Gary Runkel Canton, MI ------------------------ Yahoo! Groups Sponsor --------------------~--> Give the gift of life to a sick child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/8LmulB/TM --------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/