[Chrysler300] Alignment - 300C

["Carlton Schroeder" <schroe99@xxxxxxxxxxxx>]

Thanks to Bob Merritt for providing the message I lost.

I just noticed my Service Manual shows caster (w/PS) should be +3/4 degree + or - 3/4 degree.  This is different from the caster values presented in the memo (it showed R + 2 1/2 d, L + 2 1/4 d).  Camber and toe-in values agreed between the memo and manual.

In Dave Grove's memo he recommended 0d caster and agreed with the camber and toe-in values.  I know Dave was a very knowledgeable fellow; should I follow his recommendations?

Thanks again,

Carlton    

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/