Re: [Chrysler300] Driver Side Exhaust manifold elbow removal

[lettercars@xxxxxxx]

In a message dated 2/23/2005 7:43:40 PM Eastern Standard Time, 
paradise42@xxxxxxxxxxx writes:

> 
> 
> I replaced the passenger side exhaust manifold elbow gaskets on my 300g 
> quite easily. Now its time to do the driver side. I can't even see the 
> elbow. Can anyone give me some tips regarding the best route to get this 
> elbow off and back on? Almost looks like the long ram has to come off. Your 
> advise is appreciated.
> 
> Gary Eidson Naples FL 
> 

Hi Gary and All:
Perhaps someone has already replied privately to you on this, but here goes 
anyway.  I think you will find the left side elbow quite accessable once you 
remove the left front tire and the fender inner removable panel.  Hope this 
helps.  300ly, Gil Cunningham


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/