Re: [Chrysler300] 300g brake system

["Don Verity" <d.verity@xxxx>]

Sounds like the shoe adjustment is way off to me. I would adjust the brakes
and check again.
300ly,
Don
----- Original Message -----
From: William Barrie <blueweststudio@xxxx>
To: 300club <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Saturday, January 03, 2004 10:57 AM
Subject: [Chrysler300] 300g brake system


HAPPY NEW YEAR FELLOW MEMBERS,

I just installed a new master cylinder and I have a problem.Here's
whats happening. First, all the wheel cylinders have been rebuilt, new lines
and no leaks.I bench bled the master cylinder following the supplyer's
instructions, prior to installing. After installing the master, I re-bled
all the brake lines in the proper order.Now, when I first press the brake
pedel, it goes to the floor and after a few pumps it is up fully.While
applyingconstent pressure to the pedel, the pedel remains firm. If I
release, and wait 30 seconds, the pedel will now go to the floor when
depressed.Three more complete line bleeds and the same result. Did I do
something wrong when I bench bled the master cylinder?

Thank you,
Barrie


---------------------------------
Do you Yahoo!?
Free Pop-Up Blocker - Get it now

[Non-text portions of this message have been removed]


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm


Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/