Re: [Chrysler300] Ram part # is...

[John Hertog <crossram@xxxx>]

With regards to rams, Tom, best thing is to check out the following link:
http://www.chrysler300club.com/uniq/allaboutrams/allaboutrams.html

This article, by Bob Merritt, will explain it all to you.

By the way , based on your previous e-mail, you have a bare pair of 1960
(long) rams

John Hertog
Sag Harbor NY



----- Original Message ----- 
From: "Thomas L. DeBusk" <cfdebusk@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Thursday, August 28, 2003 3:29 PM
Subject: [Chrysler300] Ram part # is...


> My rams are Part #1947163. That help anybody ID them clearly? According
> to the Chrysler 300 Club, Inc. page that's a long ram, and it was
> optional for the F, G, H, and K, standard on the J. I've gotten other
> information that seems to indicate K's should only have short rams.
> Anybody clear that up?
>
> Thomas
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>