Richard Just finished installing one of these myself. I use a razor knife with a fresh blade. A jig saw will be too rough and may tear. Two passes with the razor knike and I was through the material. Paul 300F Vancouver BC --- Richard Osborne <richard@xxxx> wrote: > Good Morning, > > Finally moved into the new house and tired of > working on it. Trying to > divert things back to the 300 G, temporarily. > > I have a new rear shelf panel from Goers (mesh vinyl > and press board). > I need to cut out the speaker/defroster holes. I was > going to use a jig > saw, but wanted to ask if anyone has cut these with > another method? If > so, how did you do this? If you used the jig saw, > what type of blade did > you use (metal, wood...)? > > Thanks, > > Richard Osborne > > ------------------------ Yahoo! Groups Sponsor > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > > To unsubscribe from this group, send an email to: > Chrysler300-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > ______________________________________________________________________ Post your free ad now! http://personals.yahoo.ca